fm.

Google Ads showing zero conversions: check which goals are primary before you touch a tag

A zero in the Conversions column is either a real zero or a settings problem. How I tell them apart with one CRM count, and the goal setting that hid a month of leads at Pipe17.

Key takeaways

  • If Google Ads is showing zero conversions while leads arrive, count the CRM contacts that carry a Google click ID for the same dates. If that count is above zero, the ads are producing leads and the reporting is what's broken.
  • The first setting I check is which conversion goals are primary. A secondary goal only reports under All conversions, so the Conversions column stays at zero and bidding never sees the lead.
  • At Pipe17, HubSpot showed 12 click-ID contacts in a month and Google Ads showed none. Both form goals were secondary, and six of eight campaigns were bidding on clicks or impression share.
  • I made the goals primary and moved all eight campaigns to conversion-based bidding the same day. Over the next three weekly checks the count went from 0 to 1 to 3, across three campaigns.
  • Some zeros are real. A clean setup is how you find out which ones.

01Why Google Ads shows zero conversions when leads are coming in

Google Ads shows zero conversions for one of two reasons: nobody converted, or somebody did and the account isn't set up to count it in the Conversions column. To tell which, compare that column with the number of new CRM contacts that carry a Google click ID for the same dates. If the CRM has them and Google doesn't, look at the goal settings before you touch a tag.

The mechanic behind it is simple. Every conversion action in Google Ads is either primary or secondary. Primary actions fill the Conversions column and are what conversion-based bidding optimizes toward. Secondary actions are recorded for observation and only show up under All conversions. An account where every lead action is secondary will report zero forever, with working tags and a full inbox.

02How to find the cause

  1. Count click-ID contacts in the CRM.Filter new contacts for the month to those with a Google click ID stored on the record. Read a few of them to make sure they're real people and not test fills.
  2. Put two columns side by side.Add All conversions next to Conversions in the campaign view, for the same dates. A gap between them points at goal settings.
  3. Open the goal settings.Check whether each lead action is primary or secondary at the account level, then check whether any campaign uses its own goal selection that leaves the action out.
  4. Look at the bid strategy on every campaign.A campaign on clicks or impression share isn't working toward a form fill, whatever the column says.
  5. Only then check the tag and the upload.If both columns are zero and the CRM still has click-ID contacts, the action isn't recording. Look at the conversion action's status and at the diagnostics for any offline upload.
What you seeLikely causeWhat to check
Conversions is zero, All conversions is notLead actions are secondary, or left out of the campaign's goalsGoal settings at account and campaign level
Both columns are zero, CRM has click-ID contactsThe tag or the upload isn't recordingConversion action status, tag firing on the thank-you step, upload diagnostics
CRM has paid leads but no click IDs on themThe click ID is lost between the ad and the formAuto-tagging, redirects that strip the URL, the hidden field or cookie that stores the ID
Conversions now count, but nothing improvesBidding is still on clicks or impression shareBid strategy on each campaign
No click-ID contacts in the CRM eitherA real zeroSearch terms, match types and the landing page

One more thing to rule out before you call anything broken. By default Google reports a conversion against the date of the click, so a lead from last week's click appears in last week's numbers. Widen the date range before you decide a number is zero.

03What it looked like at Pipe17

At Pipe17, a B2B SaaS company with a sales cycle of six months or more, HubSpot showed 12 new contacts with a Google click ID in one month. I read them, and 11 were legitimate. Google Ads showed zero conversions for the same month.

The tags were fine and so was the offline upload. The problem was configuration, in two places:

  • Goals. The demo form and contact form goals were set as secondary at the account level, so every form fill landed under All conversions and nowhere else.
  • Bidding. Six of eight campaigns were bidding on clicks or impression share, so nothing in the account was optimizing toward a form fill.

I made both goals primary and moved all eight campaigns to conversion-based bidding the same day, seven on Maximize Conversions and one on Maximize Conversion Value. Over the next three weekly checks, the conversion count on enabled campaigns went from 0 to 1 to 3, spread across three different non-brand campaigns. Those are small numbers. In an account with a long sales cycle they're the difference between bidding with a signal and bidding with none.

04Offline conversion tracking and enhanced conversions for leads

A form fill is the first thing worth counting, and in B2B it's a weak one. Once the Conversions column works, the next job is sending Google what happened after the form. That's Google Ads offline conversion tracking, and it depends on the same click ID you just used for the diagnosis.

  • Keep the click on the form. Every website form at Pipe17 posted server-side to HubSpot with the visitor's tracking cookie, first-touch UTMs, landing page and Google click ID. HubSpot held 731+ contacts with a click ID.
  • Turn on enhanced conversions for leads. It matches on the hashed email or phone from the form, which covers leads whose click ID went missing.
  • Send stages with values. Opportunity and closed-won stages went back to Google Ads as offline conversions with a value on each, so bidding could see revenue and not only form fills.

The event choice and the value setup are in my note on value-based bidding. How the click ID then proves which deals paid search produced is in B2B marketing attribution for long sales cycles.

05What the fix didn't do

Fixing the count doesn't create buyers. In the same account, two generic category campaigns bought 147 clicks in one full month and produced no conversions, and a 3PL software campaign went 90 days without one before I paused it. Those were real zeros. The search terms and the click-ID count in HubSpot agreed with Google.

The rebuilt non-brand account was also unproven when I left. Three campaigns were converting and the volume was small. What I can say is that the account could measure itself, which it couldn't do before.

Goal settings are one line in the Google Ads audit checklist I run. If your Conversions column and your CRM disagree, a Google Ads audit is the quickest way to find out why, and it's where most of my work as a B2B SaaS paid ads consultant starts.

FAQQuestions people ask

Why is Google Ads showing zero conversions when I'm getting leads?
Often because the account isn't counting the lead in the Conversions column. At Pipe17, Farhan Munshi found 12 new HubSpot contacts with a Google click ID in one month while Google Ads reported zero. The demo and contact form goals were set as secondary, so form fills only appeared under All conversions. Making them primary fixed the reporting.
What is the difference between primary and secondary conversion actions in Google Ads?
A primary conversion action is reported in the Conversions column and is what conversion-based bidding optimizes toward. A secondary action is recorded for observation and only appears under All conversions. If every lead action in an account is secondary, the Conversions column reads zero no matter how many forms are filled in. Farhan Munshi found that with both form goals at Pipe17.
How do I check if Google Ads conversion tracking is working?
Count the new contacts in your CRM that carry a Google click ID for a period, then compare that with the Conversions and All conversions columns for the same dates. Farhan Munshi uses this check first because it separates three cases: a real zero, a goal setting problem and a tag or upload that isn't recording anything.
What is Google Ads offline conversion tracking?
It means sending Google the outcomes that happen after the form fill, such as an opportunity or a closed deal, matched back to the ad click. At Pipe17, Farhan Munshi stored the Google click ID on every form submission, turned on enhanced conversions for leads and sent opportunity and closed-won stages back with a value on each.
Should I change bidding after fixing conversion tracking?
Yes, if the campaigns were bidding on clicks or impression share. A fixed Conversions column changes nothing while bidding ignores it. At Pipe17, Farhan Munshi moved all eight campaigns to conversion-based bidding the same day he fixed the goals, seven on Maximize Conversions and one on Maximize Conversion Value. Conversions appeared in three campaigns over the next three weekly checks.