fm.

Cross-sell email examples for SaaS: four campaigns and what each one did

Four cross-sell sequences I sent to existing customers at a compliance SaaS company, with the structure, the targeting rules, the numbers side by side and the customer webinar that ran next to each one.

Key takeaways

  • A cross-sell email campaign for SaaS is a short sequence to customers who don't own one specific product: a light asset first, proof second and a consultation offer last.
  • Lead with the customer's problem. At Assent every sequence opened with a regulation and its deadline, and the module came after.
  • Four campaigns opened between 16.0% and 36.1%. The smallest list opened best, and unsubscribes stayed between 0.04% and 0.23%.
  • Suppress accounts with an open opportunity and accounts a rep has recently approached.
  • Pair the sequence with a customer webinar. Email drove 73% to 96% of webinar registrations, and the attendee list gave Sales a reason to call.

01What a cross-sell email campaign looks like

A cross-sell email campaign is a sequence of three to five emails sent to existing customers who don't own one specific product, built to move them from a problem they recognize to a conversation with their account executive. The structure that worked for me was a light asset first, proof second and a consultation offer last.

The examples here are from Assent, a supply chain compliance SaaS company where I was the first customer marketing hire. Customers buy by module, and each module covers a regulation. Each campaign went to accounts that didn't own one module yet.

  1. A light asset first.A handbook, a guide or a one-page timeline. Short enough that reading it costs the customer nothing.
  2. Proof second.A case study from a company that looks like theirs.
  3. A consultation last.A direct offer to talk to their account executive about scope.

The emails went out about one a week. My first plan gated each step, so only people who engaged with one touch got the next. Gating hands Sales a small group that has shown interest three times, and it stops you mailing people who never opened the first email.

02Regulation first, product second

Nobody opens an email about a module. They open an email about a deadline that applies to them. So every sequence led with the rule: expiring RoHS exemptions, PFAS reporting deadlines, tightening REACH enforcement, state packaging laws. The module showed up after the customer understood the problem.

Two subject lines from the EPR sequence show the tone:

  • "If your products have packaging, read this"
  • "The 21-month EPR clock already ran out"

If you don't sell compliance software, the equivalent is whatever deadline, cost or risk is already on your customer's calendar. Start there and bring the product in second.

03Four campaigns, side by side

CampaignLed withAudienceSequenceOpen rateForm fillsWebinar registrations from email
RoHSExpiring exemptions317 accounts, 465 contacts3 emails and a webinar36.1%2473%
PFASReporting deadlines333 accounts, 1,343 contacts4 emails and a webinar18.5%3888% of 521
REACHTightening enforcement256 accounts, 1,562 contacts5 emails and a webinar16.0%, measured after 3 of 5 emails1396% of 220
EPRState packaging laws3,025 contacts4 emails30.5% average118 from one emailNo webinar in the sequence

Unsubscribe rates were 0.13% on RoHS, 0.23% on PFAS and 0.04% on REACH. The RoHS sequence also had a 2.6% click rate. In one quarter, the REACH and EPR sequences together sent 19,618 emails to 4,587 customer contacts.

04Targeting and suppression rules

  • One product gap per list. I pulled each audience from the module-gap fields in Salesforce, one module at a time.
  • The right contacts. The main Customer Success contact, plus anyone who had a role on a past closed-won opportunity.
  • Suppress live deals. Accounts with an active opportunity were left out, and so were accounts a rep had recently approached. Sales teams are sensitive about extra touches on a live deal, and they're right.
  • Break the list out by segment. Each list was split into mid-market, strategic and enterprise accounts.
  • Sign it from the company. Campaign emails came from the company, not from an individual.

05Tests inside the sequences

  • Active against inactive contacts. On the PFAS sequence I split the list. Inactive contacts gave near-zero engagement.
  • Ungated content. The second REACH email tested content with no form in front of it, to get more people into the top of the sequence.
  • A scoping email before the sequence. EPR opened with an extra first email that only asked whether the rule applied to the reader, linked to a state-by-state page.
  • An infographic instead of a document. One EPR email built around an infographic produced 118 form fills. The RoHS, PFAS and REACH sequences produced 75 between them.

06The customer webinar beside each sequence

Three of the four sequences carried an invite to a customer-only webinar on the same regulation. These were 60-minute sessions on Goldcast, presented by in-house regulatory experts, with prospects suppressed from the invite list.

The brief

Every webinar started as a written brief, submitted at least six weeks ahead: the topic, the problem it solved, three things attendees would learn, the audience, the suppression list and the target. For one early session the target was 200 registrations and 100 live attendees.

The assets

  • A landing page.
  • Two promotional emails, a last-chance email and a reminder two days before.
  • A slot in the customer newsletter.
  • A recap email the day after, with the recording and three related resources.

The recap to Sales

The RoHS exemptions session had 394 registrations and 207 live attendees, a 53% attendance rate. People stayed 49 of 60 minutes on average, asked 16 questions and sent two demo requests. Three days later the internal teams had a recap with those numbers, and Sales had a separate list: 69 contacts at 56 companies who attended and didn't own the module. A rep can call that list the same week, with a reason.

07What didn't work

  • Bigger lists opened less. 36.1% at 465 contacts, 18.5% at 1,343 and 16.0% at 1,562. The account counts were close, so the extra volume came from more contacts per account, and those contacts were less engaged.
  • Inactive contacts. They needed a different approach, and a longer sequence wasn't it.
  • One sequence never shipped. I drafted four conflict minerals emails, then paused them when the US rule behind the campaign looked like it might change. Regulation is a strong hook until the regulation moves.
  • The handoff was the blind spot. Once an engaged account went to an account executive, I couldn't see what happened until an opportunity appeared.

How these campaigns were chosen, segmented and measured against expansion pipeline is in customer marketing strategy for B2B SaaS. I build this kind of program as a SaaS marketing consultant and in B2B demand generation work, and here's how to work with me.

FAQQuestions people ask

What is a cross-sell email in SaaS?
A cross-sell email goes to an existing customer about a product or module they don't own yet. It works best as a short sequence. At Assent, Farhan Munshi sent three to five emails per campaign to customers missing one compliance module: a light asset first, a case study second and an offer to talk to their account executive last.
How many emails should a cross-sell sequence have?
Three to five, about one a week. One email on one topic gets very little. Farhan Munshi's cross-sell sequences at Assent ran three emails for RoHS, four for PFAS, five for REACH and four for EPR, usually with a customer webinar on the same regulation alongside.
What open rate should a cross-sell email to customers get?
In four campaigns Farhan Munshi ran at Assent, open rates ran from 16.0% to 36.1%, and list size explained most of the spread. A sequence to 465 contacts opened at 36.1%. One to 1,562 contacts opened at 16.0%. Unsubscribe rates stayed between 0.04% and 0.23% throughout.
What should a cross-sell email subject line say?
Name the customer's problem and leave the product out. Farhan Munshi's sequences at Assent led with a regulation and its deadline. Two subject lines from the EPR sequence were 'If your products have packaging, read this' and 'The 21-month EPR clock already ran out'. That sequence averaged a 30.5% open rate.
Who should be left out of a cross-sell email campaign?
Accounts with an open sales opportunity and accounts a rep has recently approached. At Assent, Farhan Munshi suppressed both from every cross-sell send, because Sales teams are sensitive about extra touches on a live deal. Inactive contacts are also worth splitting out. In his PFAS test they gave near-zero engagement.